Sahil Alloys & Machine Tools
Products CNC-SVL Series

CNC VTL SVL Series 400-1000

Series 400-1000

Download Catalogue of this product

SVL-400 - SVL-1000

Heavy Duty Series

  • SVL-400
  • SVL-600
  • SVL-800
  • SVL-1000

Sahil Alloys and machine tools enhance CNC VTL vertical turning lathe machine that is used for a respective production of duplicate which by their nature of cutting process are usually interchangeable. The construction of this machine has minimized any misalignment or out of suaveness to provide high accuracy. Apart from this, more specification is the maximum swing and turning diameter varies according to the specified capacity of the machine. The vertical turning lathes solution capable of meeting and production needs. The RAM head pulls the hydraulic power and to protect the accurate positioning and firm clamping with Automatic tool change (ATC), the number of tool position and cross- section of RAM. The Ram head pulls the T-bolt with hydraulic power to clamp tool holder. To insure error free location and firm clamping of tool holder, Curvic coupling is used between the ram and tool holder. The bottom of double column is steady on both floor and the table base, and the top is fixed against the top beam. However the inclusive construction design is acceptable for heavy loads and heavy duty cutting. Tool holder clamping process of the VTC series is the pull-stud bolt type. To accept both turning and milling tools, the Ram is designed to hold ISO.50 spindle taper. The range of table speed is 3-300 rpm to 3-150 rpm and moreover, it is 2-step change gear speed. This machine is using consequence can be made on own creativity and it is trouble free to utilize.


Model UNIT SVL-400 SVL-600 SVL-800 SVL-1000
Max.Turning Dia mm 400 600 800 1000
Max.Turning Length mm 400 600 800 1000
Max.Work Piece Weight kg 600 800 1000 1200
Chuck Size mm 300 400 600 800
Spindle Motor kw 7.5/10kw 11/15kw 15/18.5 18.5/22
Spindle Speed rpm 0-800 0-600 0-500 0-400
Number of Tools 8 8 8/12(OP) 8/12(OP)
Tool Cross Section 25 25 32 32
X Axis Travel mm 250 350 450 550
Z Axis Rapid Rate mm 400 600 800 1000
Rapid Taverse X-Axis m/min 10 10 10 10
Rapid Traverse Y-Axis m/min 10 10 10 10
Control System Fanuc/Siemens Fanuc/Siemens Fanuc/Siemens Fanuc/Siemens
Machine (L X W) mm 2500x1200 2800x2500 3000x2800 4300x3600
Machine (H) mm 2600 2800 3000 3500
Machine Weight kg 5000 7000 8500 11000
Power Requirement kw 17 20 25 30

Standard Accessories

  • Complete splash guard
  • Table with manual 4-jaw chuck as spec.
  • Protection door
  • Automatic lubrication system
  • Work light
  • Warning light (R/Y/G)
  • Heat exchanger for electrical cabinet
  • Coolant system with tank(3 bars through tool holder)
  • SVL-1000 fixed type crossrail
  • Leveling bolts


  • Hydraulic chuck
  • High power motor than spec.
  • Air conditioner for electrical cabinet
  • Power transformer, external
  • Oil skimmer (Disk type)
  • Tool holder base
  • Tool presetter
  • Linear encoder of X/Z axis
  • Lubricant chiller for spindle bearing & gear
  • Vertical travel (Z axis) to raise travel is variable
  • Hard jaws of hydraulic chuck
  • Live spindle with c-axis
  • Through coolant
  • Dual gear box for tool live spindle
  • Chip conveyor, scraper type
  • SVL-1000 travel type crossrail
  • CNC Controller 18i-T (model C series)
  • Turnkey solution